Wall Mount 3 Pressure CO2 regulator, 1/4 Barb fittings, ball valve shutoffs, 60" high pressure line
close	Quantity in Basket: None Code: JO60-H3-K4H4BC Price: $185.95
	Upgrade to white adjustment handles ($13.95)
Quantity:
Wall Mount 3 Pressure 0 - 60 PSI CO2 regulator with 1/4 Barb fittings and ball valve shutoffs and 60" high pressure line This commercial quality, 3 pressure, triple gauge regulator is built to last and loaded with commercial grade features! It works with any Co2 Tank with a CGA-320 valve, the USA and Canadian standard, and measures PSI. The high pressure gauge measures 0 � 2000 PSI, indicates how much Co2 is left in the cylinder and when it should be refilled. The adjustment screws in the center is used to easily adjust the output pressure and can be adjusted with a thin dime or a small screwdriver. The adjustment screw also features a locking nut to prevent tampering. The commercial 2 pressure, triple gauge Co2 regulator has a forged brass body. This regulator also features a non-adjustable safety blow off at 60 PSI, a flow control inlet nipple filter and a re-useable nylon CO2 tank inlet seal. Also included is a check valve in the outlet that prevents backflow of liquids into the regulator. In addition, the flow control on this regulator is automatic, which means that it automatically adjusts and regulates the pressure. This is the industry standard found in most commercial environments. This CO2 regulator set comes complete with: 3 independent regulators with individual, settable pressures 3 - 0 - 60 PSI low pressure gauges 0 - 2000 PSI tank pressure gauge Ball valve shutoff valve with integral check valve on each regulator Re-useable nylon CO2 tank seal Pre-attached wall mount brackets 60" flexible high pressure line This regulator measures:     12.6" Wide (end of gauge to where the high pressure line can flex)     6.75" tall (top of gauge to tip of red shutoff valve)     4.24" deep (bottom of mounting bracket to top of silver adjustment screw) The hose is flexible enough to bend into a 6" circle (3" radius) if needed. Australian Orders - Unless you instruct us to do otherwise, all regulators shipped from us have the correct AS2473 Type 30 Australian tank nut already installed. European Orders - Unless you instruct us to do otherwise, all regulators shipped from us have a European DIN 477 No. 6 tank nut already installed. This tank nut should be compatible throughout Europe and England - please verify with your local CO2 supplier before ordering from us.

Value Priced CO2 Regulators Great value at a low price Our lowest cost regulators	Double Gauge CO2 Regulators Our best sellers Includes high pressure gauge to monitor tank pressure	Dual Outlet CO2 Regulators Supply CO2 to 2 separate kegs, each with its own check valve and ball valve shutoff
Secondary CO2 Regulators Provide different pressures to multiple kegs Each pressure is independently settable Expandable - unscrew the cap from the left side and add additional secondary regulators with a short jumper hose.	All of our CO2 regulators are manufactured from high quality, commercial components. Except for the gauges themselves, all components are manufactured in the USA. Custom configurations are also available at no extra cost - just contact us.	Regulator & Manifold Combinations Great for tight spaces Each outlet has its own check valve and ball valve shutoff
1 Pressure Wall Mount CO2 Regulators Mount your regulator inside your kegerator and keep your CO2 tank outside Includes 60" flexible high pressure CO2 line		Dual Pressure CO2 Regulators Provide 2 different pressures at the same time Each pressure is independently settable
2 Pressure Wall Mount CO2 Regulators Mount your regulator inside your kegerator and keep your CO2 tank outside Includes 60" flexible high pressure CO2 line	Regulator & Manifold Combinations Right angle manifold - Great for chest freezer Each outlet has its own check valve and ball valve shutoff	4 Pressure Wall Mount CO2 Regulators Mount your regulator inside your kegerator and keep your CO2 tank outside Includes 60" flexible high pressure CO2 line
High Pressure Regulators Non-beer regulators - CO2 and Nitrogen Used for welding, off road, air tools	3 Pressure Wall Mount CO2 Regulators Mount your regulator inside your kegerator and keep your CO2 tank outside Includes 60" flexible high pressure CO2 line	Aquarium / Hydroponics Regulators Used for CO2 enrichment - for more healthy plant growth

This site is owned and operated by Tom Hargrave Sales
12021 South Memorial Parkway, Suite N-4
Huntsville, AL  35803
thargrav@hiwaay.net