0 - 60 PSI CO2 regulator with Y and 2 - 1/4 Flare (threaded) fittings with ball valve shutoffs
This commercial quality double gauge regulator with Y output is built to last
and loaded with commercial grade features! It works with any Co2 Tank with a
CGA-320 valve, the USA and Canadian standard, and measures PSI. The second gauge
measures 0 � 2000 PSI, indicates how much Co2 is left in the cylinder and when
it should be refilled. The adjustment screw in the center is used to easily
adjust the output pressure and can be adjusted with a thin dime or a small
screwdriver. The adjustment screw also features a locking nut to prevent
The commercial double gauge Co2 regulator has a forged brass body. This
regulator also features a non-adjustable safety blow off at 60 PSI, a flow
control inlet nipple filter and a re-useable nylon CO2 tank inlet seal. Also
included is a check valve in each outlet that prevents backflow of liquids into
the regulator and prevents cross flow from one line to the other. In addition,
the flow control on this regulator is automatic, which means that it
automatically adjusts and regulates the pressure. This is the industry standard
found in most commercial environments.
Want to take a closer look at one of our regulators with a Y fitting? Then
Click Here for a 3D
Image - you can spin the regulator around, and zoom in / zoom out. This is a
large file and will take a while to download on slower systems!
This CO2 regulator comes complete with:
0-60 PSI low pressure gauge
0-2000 PSI tank pressure gauge
Brass Y splitter, to split the CO2 into 2 outputs, each with its own shutoff
2 - Ball valve shutoff valves with integral check valve
Re-useable nylon CO2 tank seal
Use this regulator if you need only need output pressure but like the ability
to shut off each line individually.
2 independent CO2 lines can be run from this regulator, each isolated from
the other with its own check valve.
Note: Please see our JO60-2 series regulators if you
need to deliver more than one pressure at a time.
Australian Orders - Unless you instruct
us to do otherwise, all regulators shipped from us have the correct AS2473 Type
30 Australian tank nut already installed.
European Orders - Unless you instruct us to do otherwise, all regulators
shipped from us have a European DIN 477 No. 6 tank nut already installed. This
tank nut should be compatible throughout Europe and England - please verify with
your local CO2 supplier before ordering from us.